Home / News

New Product Updates & Latest News

Commonwealth Games ‘hero’ The Raging Bull

Posted 27/09/2022

    The Raging Bull left his home in Centenary Square recently and has now found a new temporary home - in the carpark of Frank Allart!

    We were very honoured when asked if the Bull could be relocated temporarily from Centenary Square to within our carpark. They needed somewhere local in the city with enough space to hold the impressive 30ft beast.

    The Raging Bull had spent a two-month stint in the city after wowing the world during the Commonwealth Games opening ceremony in July, where it had been seen by over four million visitors since it first arrived.

    His future is currently not yet known - but discussions are underway to find him a permanent home in the city.

    In the meantime, it’s a pleasure that we can help, and he is welcome to stay as long as he likes.

WestEdge 2022 - what's on show

Posted 16/09/2022

    Frank Allart has developed and released a full collection of stand-alone Seating Collars to sit under our Select and Precision Collection Levers and Knobs to give that clean contemporary look. There are 5 unique designs based on the Select Collection and 4 textured designs for the Precision Collection. They can also be mixed and matched across the collections. These Seating Collars can be installed for both mortise and tubular latches/locks and are available in each of Frank Allart’s over 30 standard finishes.

    Along with the Seating Collars Frank Allart has also released; a Lift and Slide Collection, 14 new Plate designs to accompany the existing 9 Plate designs, Brass Lift off & 3 Knuckle hinges, and new contemporary lever designs. All keeping with the Frank Allart ‘customizable standard’ structure. Each will have multiple mix and match options and over 40 finish choices.

    Click here to view the showboards.

WestEdge Design Fair 2022, September 16-18

Posted 30/08/2022

    The popular WestEdge Design Fair will make its Dallas debut this fall! WestEdge Dallas is a three-day event showcasing the best in modern design, all in an environment designed to engage, entertain and inspire. What makes this design fair even more unique is that it will be co-located with the 2022 Artexpo Dallas at Market Hall in the Dallas Design District! With two notable expositions under the same roof, guests are invited to discover and shop from hundreds of leading names in the art and interior design industries. https://westedgedesignfair.com/

    Design trade receive complimentary admission, sign up here: https://westedgedesignfair.regfox.com/westedge-design-fair-dallas-trade-registration-2022

    Visit us at booth #332 in Dallas this September!

New Garment Rod Collection

Posted 25/08/2021

    A full collection of Garment Rods (Valet Rods) are now available using Select and Precision Rosettes, along with the clients choice of pull knobs from our cabinet collection.
    With over 30 finishes to be mixed and matched as desired, thousands of creative combinations can be designed.

    Click here for more information.

Catalogue Update - July 2021

Posted 03/08/2021

    Our printed Catalogue has recently been updated to include several new products, along with some page amendments, and notification of a few discontinued lines. A pdf of these new and updated pages, with a brief overview of the changes, can be opened and downloaded here. The Product Overview on our website has already been updated. Should you have any queries relating to any of these updates, please contact our sales team for more information.

    Click here to open and download the pdf.

Cabinet Knobs & Pulls brochure

Posted 22/06/2020

    We are delighted to introduce many new products into our Cabinet range which are now featured within an updated Cabinet Knobs & Pulls brochure.

    This latest issue contains new and exciting designs including our Precision collection, along with the choice to mix knobs and pulls with many rosette and square plate options should you wish to be creative or mix the finish.

    Click here to view the brochure.

New Rope Knurl Design

Posted 28/01/2020

    Introducing our new Rope Knurl range of door, window and cabinet hardware. A classic, fine machined detail embellishes the edge of each piece. Available in a range of sizes and over 40 hand finished patinas and finishes, including our solid bronze finishes.

    Click here for further information.

May we wish you a Merry Christmas & Happy New Year from all the team

Posted 18/12/2019

    This year we will be making a generous donation to Birmingham Children’s Hospital again in place of sending corporate Christmas cards.

    Please note: Our Factory & Offices will be closed from midday 20th December and will re-open on 2nd January.

Allart Precision Door Levers – your design

Posted 05/12/2019

    During our exhibition at 100% Design Show London, visitors were asked to use their creative skills to design their own Allart Precision door levers. Allart Precision has the freedom to mix design elements and over 30 finishes across the Lever and Rosette, giving the designer the tools to create a stunning and individual piece.

    Click here to open gallery.

DPHA Conference bar sponsorship & product award entry

Posted 05/11/2019

    The 2019 Annual DPHA Conference is headed to the Pacific Northwest at the Hyatt Regency Seattle November 7-10. Frank Allart & Company co-sponsor the bar on friday night - so enjoy a drink on us!

    Please wish us luck with our entry into 'The Hardware Product of the Year' - our New Spiral Lever paired with Starburst Rosette. Thank You.

    Click here for further information.

New Finishes & Patinas introduced

Posted 07/10/2019

    We are pleased to introduce our latest range of over 40 traditional and exclusive metal finishes and patinas, skilfully created and meticulously hand finished by our experienced craftspeople to the highest standards. Please download our booklet showing all our finishes which includes a general guide to the suitability of the finish within certain locations and how to care for the finish once installed. To assist the specification process, metal swatches and actual product samples may be made available upon request.

    Click here to download the brochure.

New environmentally friendly van.

Posted 05/09/2019

    We are committed to reducing our carbon emissions and mitigating our environmental footprint.

    Electric technology has developed rapidly and is now a far more sustainable transport solution. The e-NV200 was the obvious choice for us, allowing us to easily complete daily deliveries more sustainably and efficiently.

    The e-NV200 has a range of up to 106 miles on a single charge, which means it is easily capable of making several deliveries per week within the local area

Introducing Matt Black Chrome

Posted 25/06/2019

    A new contemporary deep matt black chromium plated finish which is very flat, non-reflective and hard wearing. Available on all products across the Frank Allart range.

    With the introduction of Matt Black Chrome and our other recently added finishes, we now have over 40 to choose from.

ICFF May 2019

Posted 07/06/2019

    We were very excited to return again to ICFF in New York which was abuzz with more than 38,000 attendees over the four day show. We showcased our new Precision range of door, window and cabinet hardware, in addition to displaying our core range, which received much attention. A special thanks to all who visited our booth.

WestEdge Design Fair, October 18-21 2018.

Posted 31/10/18

    With a 50% increase in visitor numbers this year, the Westedge Design Fair was busier than ever! Now in its sixth year, WestEdge is an ultra cool exhibition which offers the best in modern design, set within The Barker Aircraft Hanger, Santa Monica, an environment designed to engage, entertain and inspire. We were very excited to return again and to launch our new Precision range of door furniture, which received much attention. A special thanks to all who visited our booth.

Allart Precision

Posted 31/10/18

    Recently launched at the 100% Design show, London, and Westedge Design Fair, Santa Monica, our new Allart Precision range took centre stage and received glowing reviews. A small selection of the range was showcased, featuring some of the new designs which will be available soon. We are incredibly excited to offer these new designs, which in true Frank Allart style will be available across many different product types including door, window and cabinet furniture. More news to follow soon!

100% Success

Posted 03/10/18

    Thousands of visitors attended this year's fantastic 100% Design exhibition in Olympia where we featured our new stand design and previewed our new Precision range - due to be launched in 2019. It truly has been one to remember and made its mark as the stand out show during London Design Festival.

    A special thanks goes to our customers, designers and architects who visited our stand over the four days.

Cabinet Furniture Brochure

Posted 11/05/18

Introducing Four New Designs

Posted 30/04/18

    A further four new product designs are added to the Frank Allart range. Each design is available as Mortice Door Knobs, Centre Door Knobs and Cabinet Knobs, in a range of sizes and over 30 finishes.

    Click here for further information.

New Designs

Posted 22/01/18

    We are excited to introduce four new product designs to the Frank Allart range. Each design is available as Mortice Door Knobs, Centre Door Knobs and Cabinet Knobs, in a range of sizes and over 30 finishes.

    Click here for further information.

Release Key Ferrules

Posted 15/03/2017

    New Release Key Ferrules available in three designs for Backplates, and also as individual Release Ferrules that simply tap into position. Choose between square edge, rounded, or cover cap. All designs available in over 30 finishes and are supplied with a nickel plated release key.

    Click here for further information.

Posted 21/07/2016

  • 9 edge designs in square plate
  • 4 edge designs in diamond plate
  • Up to 5 sizes
  • Over 30 turn options
  • 5mm spindle fitted square or diamond orientation
  • Coin or plain hole release options
  • Available in up to 32 finishes
  • Custom sizes available upon request

    Click here for further information.

Posted 22/06/2016

  • 9 edge designs
  • lipped and plain versions
  • choice of 3 sizes
  • 3 depth options
  • privacy and lock functions
  • 4 fixing methods
  • round mortice for ease of installation
  • available in up to 32 finishes
  • custom sizes available

  • Click here for further information.

Bell Pushes

Posted 18/03/2016

Introducing a new selection of twelve 5mm thick Bell Push designs to complement the Allart Select Door Knob & Lever Backplates. The square edge design is also available 3mm thick in two sizes, including a slimmer 28mm wide version to suit narrow door frames. Supplied with fully finish matched push buttons and wood screws.

Click here for further information.

Access Control Spindle

Posted 10/02/2016

This NEW Spindle is designed to provide a strong and secure fixing for the outside fixed dead (dummy) Lever/Knob when used in conjunction with a Night Latch/Electric Strike/Key Fob. Typical applications are hotel bedroom doors and high-end residential apartment entrance doors. The advantage of this unique design is that all the pull force is transferred through the spindle. Available in four lengths to suit most door thicknesses.

Click here for further information.

Flush Pulls - Lipped Designs

Posted 30/06/2015

Following the successful launch of our Flush Pulls for sliding doors, we are pleased to introduce a choice of nine Lipped Flush Pull designs suitable for hinged doors and sliding drawers. Available in ten sizes with three depth options, and either Face, Pocket or Adhesive fixed.

Click here for further information.

Euro-Profile Escutcheons

Posted 23/06/2015

Introducing a new selection of concealed fix euro-profile cylinder escutcheons offered in twelve designs and three sizes to complement our Allart Select Rosettes and Backplates.

Click here for further information.

Cabinet Knobs

Posted 04/06/2015

A new selection of Cabinet Knobs available in various sizes, all designed to complement our Allart Select and Traditional Door Knobs.

Click here for further information.